DIRECT DELIVERIES And SALES AT THE PRICE OF MANUFACTURER
the Price policy of our company is based on reasonable competitive prices, due to minimization of costs at all production phases, transportations and sales: from preparation of wood, purchase of raw material and completing before delivery to the buyer
Certificates of quality
The international awards
Recommendations of professionals
Russian federation, Moskau : + 7 903 216 00 77
Republic Belarus, Minsk : + 375 29 771 23 29
Manufacturers wholeprice sale price The minimal contract = 100 000 USD
CFR Port of New York, USA DDU , Usti nad Labem, Czech Republic EXW, Moskau, Russian federation EXW, Minsk, Republic Belarus
veneer. sliced wood veneers
wood veneer price. &euro / m2
Wood
Thickness, mm.
Radial € / m2
Floor radial € / m2
Tangenal € / m2
WOOD VENEERS OAK - 1 Quality
0,65
1,21
1,11
0,92
WOOD VENEERS OAK - 2 Quality
0,65
0,76
0,70
0,58
WOOD VENEERS ASH - 1 Quality
0,65
1,09
1,00
0,83
WOOD VENEERS ASH - 2 Quality
0,65
0,69
0,64
0,53
WOOD VENEERS BEECH - 1 Quality
0,65
1,09
1,00
0,83
WOOD VENEERS BEECH - 2 Quality
0,65
0,69
0,64
0,53
WOOD VENEERS ALDER - 1 Quality
0,65
0,54
0,49
0,41
WOOD VENEERS ALDER - 2 Quality
0,65
0,37
0,34
0,28
WOOD VENEERS BIRCH - 1 Quality
0,65
0,48
0,44
0,37
WOOD VENEERS BIRCH - 2 Quality
0,65
0,35
0,32
0,27
sliced wood veneer
sliced wood veneer (GOST 2977) turns out by planing wood on veneers sliced machine tools and intends as a facing material for products from wood. It(he) is developed from wood of the following breeds:
deciduous:
pin-vascular - birches, a beech, a hornbeam, a pear, a maple, mahogany, lindens, an alder, a nut, an aspen, a poplar, a willow;
Largly scattered - vascular - mahogany (аиле, the boss, лимба, African mahon or a common cashew, ocume, sipo, tiama, framire);
Ring vessels - a velvet tree, an elm, an oak, a chestnut;
coniferous:
larches, a pine.
On a structure of sliced wood veneer subdivide into kinds.
Kinds строганого veneer
the Kind veneer
the Designation of a kind veneer
the Characteristic of a kind veneer
on year layers
on сердцевинным to beams
Radial
Р
Year layers look like the direct parallel lines located on all surface of a sheet
Centr. beams look like the strips located not less than on 3/4 areas of a sheet
1/2 radial
other
Year layers look like the direct parallel lines located not less than on 3/4 areas of a sheet
Center. beams look like the inclined or longitudinal strips located not less than on 1/2 areas of a sheet
tangenal
Т
Year layers look like a cone of increase, corners or curves
Heart-shaped beams look like longitudinal or inclined strokes or lines
tangenal-face
ТТ
Year layers look like the closed curves
Сердцевинные beams look like curves or strokes
the Note. Veneer from a nut, a pear, a velvet tree, mahogany on kinds it is not subdivided. Veneer from a pine it is subdivided on radial and полурадиальный.
On quality of wood and the sizes on length and width veneer subdivide into grades: 1 and 2.
Veneer it should be produced edging and killed.
the Sizes edging veneer should correspond(meet) specified in the table.
the Sizes edging veneer, mm
Breed of wood
the Kind veneer
Thickness
Width, not less (with gradation 10) for a grade
Length, not less (with gradation 50) for a grade
Nominal.
Пред. откл.
1
2
1
2
Deciduous: - елкорассеянно-vascular
Р; ПР
0,4; 0,6; 0,8
*plusmn; 0,05
120 -4 +5
50 -4 +5
900 +10
400 +10
Т
0,6; 0,8
- Largly scattered -vascular
Р; ПР
0,6; 0,8
Т
0,8
- Ring vessels
Р; ПР; Т
0,8; 1,0
Coniferous
Р; ПР; Т
0,8; 1,0
All breeds wood (outgrowths)
ТТ
0,4; 0,6; 0,8
*plusmn; 0,05
200 -4 +5
100 -4 +5
200 +10
the Sizes for killed veneer are established as agreed with the consumer. As agreed with the consumer it is supposed to produce veneer standard thickness not edging which minimal sizes on width and length долны to correspond(meet) specified in the table. Humidity veneer should be 8*plusmn; 2 %.
the Parameter of a roughness of surface Rz max in accordance with GOST 7016 should be no more than 200 microns for an oak, ясеня, ильма, larches, a pine and Largly scattered -vascular breeds; for wood of other breeds no more than 100 microns.
Sheets veneer stack in packs with selection for breeds, a kind veneer and to a grade. The quantity(amount) of sheets in a pack should be not less than 10.
Each pack veneer should be tied up in one place at length veneer up to 1 m, in two places - at length more than 1 m by a twine in accordance with GOST 16266 or other material providing integrity of a pack. Packs veneer stack in packages in weight from 80 up to 500 kg with selection for breeds of wood, grades and thickness. As agreed with the consumer it is supposed to form packages in weight more than 500 kg. Each package wrap up in two layers auxiliary packing means which ends fix a polyethylene tape with a sticky layer in accordance with GOST 20477.
As auxiliary packing means use a polyethylene film in accordance with GOST 10354 or a two-layer packing paper in accordance with GOST 8828 or other materials providing preservation of humidity veneer at transportation.
Fast search in the catalogue - price
Interiors home, Individual projects. House furniture
