VENEERS. Manufacturer wood veneers. Sliced Veneer, Veneers, Manufacturer Wood veneers

Sale in the various countries of the world
United States (USA), Canada, Yuar

Internet shop Wholesale warehouses Sale

Manufacturers wholeprice sale price
The minimal contract = 25 000 USD
CFR Port of United States, New York USA
EXW, Moskau, Russian federation SALE - 10 %
EXW, Minsk, Republic Belarus SALE - 10 %

Manufacturer wood veneers. Sliced veneer

wood veneers price. &USD / m2

Wood	Thickness, mm.	Radial = $ / m2	Floor radial = $ / m2	Tangenal = $ / m2
Wood veneers OAK - 1 Quality	0,65	1,21	1,11	0,92
Wood veneers OAK - 2 Quality	0,65	0,76	0,70	0,58
Wood veneers ASH - 1 Quality	0,65	1,09	1,00	0,83
Wood veneers ASH - 2 Quality	0,65	0,69	0,64	0,53
Wood veneers BEECH - 1 Quality	0,65	1,09	1,00	0,83
Wood veneers BEECH - 2 Quality	0,65	0,69	0,64	0,53
Wood veneers ALDER - 1 Quality	0,65	0,54	0,49	0,41
Wood veneers ALDER - 2 Quality	0,65	0,37	0,34	0,28
Wood veneers BIRCH - 1 Quality	0,65	0,48	0,44	0,37
Wood veneers BIRCH - 2 Quality	0,65	0,35	0,32	0,27

sliced wood veneers

sliced wood veneers (GOST 2977) turns out by planing wood on veneers sliced machine tools and intends as a facing material for products from wood. It(he) is developed from wood of the following breeds:

deciduous:
- pin-vascular - birches, a beech, a hornbeam, a pear, a maple, mahogany, lindens, an alder, a nut, an aspen, a poplar, a willow;
- Largly scattered - vascular - mahogany (��, the boss, ��, African mahon or a common cashew, ocume, sipo, tiama, framire);
- Ring vessels - a velvet tree, an elm, an oak, a chestnut;
coniferous:
- larches, a pine.
On a structure of sliced wood veneers subdivide into kinds.

Kinds �� veneer

the Kind veneers	the Designation of a kind veneers	the Characteristic of a kind veneers
the Kind veneers	the Designation of a kind veneers	on year layers	on �� to beams
Radial	�	Year layers look like the direct parallel lines located on all surface of a sheet	Centr. beams look like the strips located not less than on 3/4 areas of a sheet
1/2 radial	other	Year layers look like the direct parallel lines located not less than on 3/4 areas of a sheet	Center. beams look like the inclined or longitudinal strips located not less than on 1/2 areas of a sheet
tangenal	�	Year layers look like a cone of increase, corners or curves	Heart-shaped beams look like longitudinal or inclined strokes or lines
tangenal-face	��	Year layers look like the closed curves	beams look like curves or strokes

the Note. Veneer from a nut, a pear, a velvet tree, mahogany on kinds it is not subdivided. Veneer from a pine it is subdivided on radial and ��.

On quality of wood and the sizes on length and width veneer subdivide into grades: 1 and 2.

Veneer it should be produced edging and killed.

the Sizes edging veneer should correspond(meet) specified in the table.

the Sizes edging veneer, mm

Breed of wood	the Kind veneers	Thickness		Width, not less (with gradation 10) for a grade		Length, not less (with gradation 50) for a grade
		Nominal.	+/-	1	2	1	2
Deciduous: - vascular	�; ��	0,4; 0,6; 0,8	*plusmn; 0,05	120 _-4 ⁺⁵	50 _-4 ⁺⁵	900 ⁺¹⁰	400 ⁺¹⁰
	�	0,6; 0,8
- Largly scattered -vascular	�; ��	0,6; 0,8
	�	0,8
- Ring vessels	�; ��; �	0,8; 1,0
Coniferous	�; ��; �	0,8; 1,0
All breeds wood (outgrowths)	��	0,4; 0,6; 0,8	*plusmn; 0,05	200 _-4 ⁺⁵	100 _-4 ⁺⁵	200 ⁺¹⁰

the Sizes for killed veneer are established as agreed with the consumer. As agreed with the consumer it is supposed to produce veneer standard thickness not edging which minimal sizes on width and length �� to correspond(meet) specified in the table. Humidity veneer should be 8*plusmn; 2 %.

the Parameter of a roughness of surface Rz _max in accordance with GOST 7016 should be no more than 200 microns for an oak, ��, ��, larches, a pine and Largly scattered -vascular breeds; for wood of other breeds no more than 100 microns.

Sheets veneer stack in packs with selection for breeds, a kind veneer and to a grade. The quantity(amount) of sheets in a pack should be not less than 10.

Each pack veneer should be tied up in one place at length veneer up to 1 m, in two places - at length more than 1 m by a twine in accordance with GOST 16266 or other material providing integrity of a pack. Packs veneer stack in packages in weight from 80 up to 500 kg with selection for breeds of wood, grades and thickness. As agreed with the consumer it is supposed to form packages in weight more than 500 kg. Each package wrap up in two layers auxiliary packing means which ends fix a polyethylene tape with a sticky layer in accordance with GOST 20477.

As auxiliary packing means use a polyethylene film in accordance with GOST 10354 or a two-layer packing paper in accordance with GOST 8828 or other materials providing preservation of humidity veneer at transportation.

VENEER. Manufacturer Veneers. Sliced Veneer, Veneers, Manufacturer Wood veneer, Sale Veneer, Veneers, Fabric Sliced Veneer, Veneer Price, Wood veneer, Veneer, Veneers, Sliced Veneer, Sawn Veneer, Manufacturer Veneer Oak, Ash, Beech, Alder, Birch, Pine, Veneering Wood, Veneer Price

Fast search in the catalogue - price :

Construction and repair. Wood production, Materials wood industry

Interior Doors, Exterior Doors. Protection and safety of dwelling

The information of the company

Wood industry. Manufacturer and build log wooden houses. Interior Doors, Exterior Doors. Furniture, mattresse.